Access Commands

Use the commands in this section to close remote connections or to view information about connections to the system.

disconnect

Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to close all active sessions, or use <session-id> to specify the session ID to close. To view the possible values for <session-id>, use the show loginsession command.

• Format: disconnect {<session_id> | all}
• Mode: Privileged EXEC

show loginsession

This command displays current Telnet and serial port connections to the switch. Use the show loginsession long command to display the complete usernames.

• Format: show loginsession
• Mode: Privileged EXEC

The display parameters for above command are:

• ID Login: Session ID
• User Name: The name the user entered to log on to the system.
• Connection From: IP address of the remote client machine or EIA-232 for the serial port connection.
• Idle Time: Time this session has been idle.
• Session Time: Total time this session has been connected.
• Session Type: Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.

show loginsession long

This command displays the complete user names of the users currently logged in to the switch.

• Format: show loginsession long
• Mode: Privileged EXEC