Message: Total number of ACL rules (x) exceeds max (y) on intf i.
Cause: The combination of all ACLs applied to an interface has resulted in requiring more rules than the platform supports.
Message: ACL name, rule x: This rule is not being logged
Cause: The ACL configuration has resulted in a requirement for more logging rules than the platform supports. The specified rule is functioning normally except for the logging action.
Message: aclLogTask: error logging ACL rule trap for correlator number
Cause: The system was unable to send an SNMP trap for this ACL rule which contains a logging attribute.
Message: IP ACL number: Forced truncation of one or more rules during config migration
Cause: While processing the saved configuration, the system encountered an ACL with more rules than is supported by the current version. This may happen when code is updated to a version supporting fewer rules per ACL than the previous version.
COS
Message: cosCnfgrInitPhase3Process: Unable to apply saved config -- using factory defaults
Cause: The COS component was unable to apply the saved configuration and has initialized to the factory default settings.
Cause: While attempting to clear the running configuration an error was encountered in removing the current settings. This may lead to an inconsistent state in the system and resetting is advised.
Message: Policy invalid for service intf: "policy name, interface x, direction y
Cause: The DiffServ policy definition is not compatible with the capabilities of the interface specified. Check the platform release notes for information on configuration limitations.
