Cause: A port was not able to be translated correctly during the receive.
Message: In hapiBroadSystemMacAddress call to 'bcm_l2_addr_add' - FAILED : x
Cause: Failed to add an L2 address to the MAC table. This should only happen when a hash collision occurs or the table is full.
Message: Failed installing mirror action - rest of the policy applied successfully
Cause: previously configured probe port is not being used in the policy. The release notes state that only a single probe port can be configured.
Message: Policy x does not contain rule x
Cause: The rule was not added to the policy due to a discrepancy in the rule count for this specific policy. Additionally, the message can be displayed when an old rule is being modified, but the old rule is not in the policy.
Message: ERROR: policy x, tmpPolicy x, size x, data x x x x x x x x
Cause: An issue installing the policy due to a possible duplicate hash.
Message: ACL x not found in internal table
Cause: Attempting to delete a non-existent ACL.
Message: ACL internal table overflow
Cause: Attempting to add an ACL to a full table.
Message: In hapiBroadQosCosQueueConfig, Failed to configure minimum bandwidth. Available bandwidth x
Cause: Attempting to configure the bandwidth beyond it's capabilities.
Message: USL: failed to put sync response on queue
Cause: A response to a sync request was not enqueued. This could indicate that a previous sync request was received after it was timed out.
Message: USL: failed to sync ipmc table on unit = x
Cause: Either the transport failed or the message was dropped.
Message: usl_task_ipmc_msg_send(): failed to send with x
Cause: Either the transport failed or the message was dropped.
Message: USL: No available entries in the STG table
Cause: The Spanning Tree Group table is full in USL.
Message: USL: failed to sync stg table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: A Trunk doesn't exist in USL
Cause: Attempting to modify a Trunk that doesn't exist.
Message: USL: A Trunk being created by bcmx already existed in USL
Cause: Possible synchronization issue between the application, hardware, and sync layer.
Message: USL: A Trunk being destroyed doesn't exist in USL
Cause: Possible synchronization issue between the application, hardware, and sync layer.
Message: USL: A Trunk being set doesn't exist in USL
Cause: Possible synchronization issue between the application, hardware, and sync layer.
Message: USL: failed to sync trunk table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: Mcast entry not found on a join
Cause: Possible synchronization issue between the application, hardware, and sync layer.
Message: USL: Mcast entry not found on a leave
Cause: Possible synchronization issue between the application, hardware, and sync layer.
Message: USL: failed to sync dvlan data on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync policy table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync VLAN table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: Invalid LAG id x
Cause: Possible synchronization issue between the driver and HAPI.
Message: Invalid uport calculated from the uport bcmx_l2_addr->lport = x
Cause: Uport not valid from driver.
Message: Invalid USP calculated from the uport\nbcmx_l2_addr->lport = x
Cause: USP not able to be calculated from the learn event for driver.
Message: Unable to insert route R/P
Cause: Route R with prefix P could not be inserted in the hardware route table. A retry will be issued.
Message: Unable to Insert host H
Cause: Host H could not be inserted in hardware host table. A retry will be issued.
Message: USL: failed to sync L3 Intf table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync L3 Host table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync L3 Route table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync initiator table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued
Message: USL: failed to sync terminator table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
Message: USL: failed to sync ip-multicast table on unit = x
Cause: Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued.
