|
|
|
|
It supports a maximum of 100G OTN backhaul. The interface of this card is 1x100G (P11) for CFP and 10x10G (P1 to P10) for SFP+.
The mode(s) supported includes:
NOTE: Lower order client types (STM1/4/16/1GE/1GFC/2GFC) are not supported for this release.
Following figure shows the front panel view of HCPSLine22 card:
Power specifications - HCPSLine22
Specification |
Range |
|---|---|
Input Voltage |
-48 V |
Maximum Power consumption |
130 W |
The visual indicators on the HCPSLine22 card include two LEDs, the Active and the Status.
Possible LED status and their significance - HCPSLine22
Card State |
Status LED |
Active LED |
|---|---|---|
Card initialization: State before the card initialize is complete on card insertion. |
Amber (Steady) |
Amber (Steady) |
Card in service: Initialization complete and card in service. |
Green (Steady) |
Green (Steady) |
Card mis-match: Network Element has already configured the slot with some other card. |
Amber |
Amber |
Card failed during boot up. |
Red |
Amber |
Card failed while in-service. |
Red |
Green |
Improper jack in of the card. |
Green (Blinking) |
Green (Blinking) |
Hard Reset: All devices reset, FPGAs cleared and reprogrammed. Goes to initializing state next. |
Amber |
Amber |
Soft Reset: Software is restarted, devices are reinitialized with provisioning. Goes to initializing state next. |
Green |
Green |
CFP Port Transmitter (Tx) and Receiver (Rx) LED Status - HCPSLine22
State |
Rx LED |
Tx LED |
|---|---|---|
CFP present (Laser on) with Rx LOS. |
Amber |
Green |
CFP present (Laser off) with Rx LOS. |
Amber |
Off |
CFP present (Laser on) with no Rx LOS. |
Green |
Green |
CFP present (Laser off) with no Rx LOS. |
Green |
Off |
Card failed while in-service. |
Red |
Green |
CFP missing (LOS detected), Laser On (attempted). |
Amber |
Green |
CFP missing (LOS masked since SFP missing and set to Admin_down), Laser Off (attempted). |
Amber |
Off |
CFP failed (whether provisioned, unprovisioned, LOS or no LOS). |
Red |
Red |
Supported Laser Types - HCPSLine22
Optics |
Rate |
Reach (Km)* |
|---|---|---|
10GE SFP+ |
10Gbps |
10km |
S64.2b SFP+ |
STM-64 |
40km |
P1L1-2D2 SFP+ |
STM-64/OTU2 |
80km |
DWDM Fixed/Tunable SFP+ |
10Gbps/STM-64/OTU2 |
80km |
CFP |
100GBASE-SR10/OTU4 |
100m |
CFP |
100GBASE-LR4/OTU4 |
10km |
CFP |
100GBASE-ER4/OTU4 |
40km |
CFP Coherent |
100GE/OTU4 |
~1000km (amplified) |
* For G.652 fiber under Standard link conditions |
||
HCPSLine22 card supports the following functional features: