To add a new Device, click from the Device grid page.
Follow the below steps to add a device.
Provide the IP address(s) in the given textbox
Input can be a single Device management IP Address or “list of Device Management IP Address separated by comma or semicolon or single space” or Device IP address in CIDR format.
Select the ‘Device Vendor’ using the dropdown menu.
Select ‘Configuration profile’ using the dropdown menu.
Input the ‘Schedule Description’ in textbox.
Select ‘Frequency’ as required.
Based on the Frequency chosen, select the Start Time.
Select the Notifier profile for the Device, so that Download events like failed to download, configuration change, Syslog) will be notified to users, configured in the notifier profile.
Select or deselect filter by ping
If Filter by Ping is enabled, NCCM will filter the PING response devices and send the Devices for Discovery process.
If Filter by ping is not selected, NCCM will send all device IP’s from Discovery process for SNMP Scan. Discovery could take more time when it ‘Filter by Ping is not selected.
Select Ping Time (in seconds). This will be used only when Filter by Ping is enabled.
Using the dropdown menu, select if the configuration profile must be downloaded through Remote or Local.
Using the dropdown menu, select if the OS Image must be downloaded through Remote or Local.
Using the dropdown menu, select if the Inventory must be downloaded through Remote or Local.
Using the dropdown menu, select if Other Configuration Download Shell must be downloaded through Remote or Local.
Select Connection Download protocol (SSH/Telnet) using the dropdown menu.
Select Running Configuration Download protocol (TFTP, FTP, Terminal, SCP, SFTP) using the dropdown menu.
Select Startup Configuration Download protocol (TFTP, FTP, Terminal, SCP, SFTP) using the dropdown menu.
Select OS Image Download Protocol (TFTP, FTP, Terminal, SCP, SFTP) using the dropdown menu.
Select Inventory Download Protocol (TFTP, FTP, Terminal, SCP, SFTP) using the dropdown menu.
Select other configuration Download protocol (TFTP, FTP, Terminal, SCP, SFTP) using the dropdown menu.
Select appropriate Device credentials.
Choose the Download Retry times.
Choose the Retry interval in Hours.
Select the NCCM Process where the device should be managed.
Manage includes Configuration Download, Device Inventory, Operation Data Download and Configuration Upload.
Click ‘Save’ to add the devices manually and immediately.
from the Device grid page.