Create IGMP FDFR End Point profile

Static: The port is configured as IGMP Multicast Router port. The profile configured with this mode has to be attached to the port connected to router in the network which is streaming traffic.
Dynamic: The port is configured as normal dynamic IGMP Multicast Host port. The profile configured with this mode has to be attached to the port connected to hosts which are triggering request to join or leave multicast group.

Perform the following steps to create IGMP FDFR End Point profile:

Go to Configuration > Layer 2 > Management Profiles menu and click IGMP Snooping option. Manage IGMP Snooping Profiles page is displayed.
Click and select the option as FDFR EndPoint Profile. Create IGMP FDFR EP Profile window is displayed.
Select or enter value for the parameters. Refer to the following IGMP FDFR End Point Profile Creation table for parameter description, the default and acceptable values supported:
Click Create. IGMP Fdfr Profile Created Successfully message is displayed.
Click OK.

IGMP FDFR End Point Profile Creation

Parameter	Description	Default Value	Acceptable Value
Profile Name	Name of the IGMP Snooping profile to be created.	--	Alphanumeric characters
MultiCast Router Mode	Select the mode as Static or Dynamic. Static: The port is configured as IGMP Multicast Router port. The profile configured with this mode has to be attached to the port connected to router in the network which is streaming traffic. Dynamic: The port is configured as normal dynamic IGMP Multicast Host port. The profile configured with this mode has to be attached to the port connected to hosts which are triggering request to join or leave multicast group.	Static	Static Dynamic
Immediate Leave Mode	Select the the status of Immediate leave mode as Enable or Disable.	Enable	Enable Disable
Handle Unknown MultiCast	Select the option as: Flood: To flood an unknown multicast. Drop: To drop an unknown multicast.	Flood	Flood Drop