Right-click options on Network View (Switches) tab

On Network View (Switches) tab, right-click option available:

• On a switch is NE UI-Configure System.
• On a TL is TL Properties.

Configuring NE System

Perform the following steps to view and edit the system configuration of the desired switch:

1. Go to Topology menu and click Topology View option. Topology View window is launched.
2. Click Network View (Switches) tab and select the desired partition.
3. Select the switch, right-click and select NE UI-Configure System. View System Configuration page is displayed in a new browser window.
4. To modify the attributes, click Edit. The Edit System Configuration page is displayed.
5. Enter the values and click Submit. A confirmation page is displayed.
6. Click Accept Valid Modifications. A Successfully Modified message is displayed.

View TL Properties

Perform the following steps to view the properties of a Topological Link (TL):

1. Go to Topology menu and click Topology View option. Topology View window is launched.
2. Click Network View (Switches) tab and select the desired partition.
3. Select the desired TL between two switches. After you select, the TL will get highlighted in pink color.

   In case of aggregated link, double-click the link between two switches and then select the desired TL.

4. Do one of the following:
   • Right-click the desired TL between two switches and select the option TL Properties. TL Properties window is displayed with information related to the selected TL.
   • Select the desired TL, go to Topology menu tab and select (TL Properties) option. TL Properties window is displayed with information related to the selected TL.