Perform the following steps to create a new PHB profile:
Go to Configuration > Layer 2 > Qos menu and click Per Hop Behavior option. Per Hop Behavior Profiles page is displayed.
Click (Create PHB). Create Per Hop Behavior Profile window is displayed as shown in the following figure:
Enter the desired PHB Name in the text box provided. Characters supported are A to Z, a to z, 0 to 9, _(underscore), -(hyphen), .(dot), space. PHB name should begin with an alphabet.
Corresponding to each EXP value, select the Cos value from the drop-down list. The acceptable value ranges from 0 to 7.
The EXP 7 to Cos 7 mapping and the Color is reserved for management traffic by default.
For each EXP to Cos mapping, select the Color from the drop-down list. The options include Green and Yellow.
Click Create. Successful message is displayed.
Click OK. The Per Hop Behavior Profile is created with the desired values.
NOTE: The Associated EMS column on Per Hop Behavior page displays the EMS Name on association of a tunnel in Qos Domain with a PHB profile. EMS name here indicates the EMS under which the PHB associated tunnel is present.
Only two profiles are required to carry all COS and Colors.
(Create PHB). Create Per Hop Behavior Profile window is displayed as shown in the following figure: