Viewing Link Aggregation Group

Link Aggregation Group is referred as LAG in this section which talks about viewing LAG, exporting the summary report and grouping the options.

To view Link Aggregation Group data, go to Configuration > Layer 2 > Aggregated Port Groups menu and click Link Aggregation Group option. The Link Aggregation Group page is displayed.

Link Aggregation Group page

Link Aggregation Group icons

Button	Description	Refer the link for more information
	Click Create Link Aggregation Group button to create a new LAG.	Add LAG
	Click Delete Link Aggregation Group button to delete the selected LAG.	Delete LAG
	Click Modify Link Aggregation Group button to edit/modify the selected LAG.	Edit LAG
	Click Reports button to export the data to any of the four available formats namely PDF, CSV, XML, HTML.	Summary report of LAG data
	Click Group By button to group the data based on the parameters provided.	Group LAG

Link Aggregation Group parameters

Parameter	Description

EMS Name	Displays the EMS name as defined by the user.
IP Address	Displays the IP Address of the nodes selected.
Name	Displays the Link aggregation group name.
ME Label	Displays the node label in which the LAG is created.
Admin Status	Displays the admin status.
Port Type	Displays the type of port.
Switch Number	Displays the switch number. The switch number is the identification number for the switches and is used as label of node boxes in the tunnel view.
Mode	Displays the LAG mode.
Type	Displays whether it is Dynamic type or Static type.
Acceptable Frame Policy	Displays the Acceptable Frame Policy type.
Pvid	Displays the port VLAN ID.
Default Prio	Displays the port default priority applied.
The following parameters are applicable for Dynamic LAG type only.
LACP Mode	Displays the LACP mode as ActiveMode or PassiveMode.
LACP Timeout	Displays the LACP timeout value as Short_Timeout or Long_Timeout.
LACP Aggregation	Displays whether the LACP aggregation is individual or aggregated.
Use Aggregator Administrative Config	Displays administrative configuration as Yes or No option.
Aggregator Actor Admin Key	Displays administrative key value for the LAG.
Aggregator Actor System ID	Displays the Mac address for the LAG. If not configured, the system Mac Address is applicable by default.
Aggregator Actor System Priority	Displays the LACP system priority value ranging from 0 to 65535.
On selecting a static LAG, the associated parameters are displayed as follows:
Member Port	Displays the member port in the LAG.
Capacity	Displays the capacity of the corresponding member port.
Role	Displays the role of the member port as either Work or Protect. This parameter will be displayed when the selected LAG is in Protection mode.

Filtering Options

Perform the following steps to search tunnels based on the various filtering criteria:

To view the filtering options on Link Aggregation Group page, switch ON the Hide Filters button. The filtering criteria are displayed.
- Mode: To filter LAG based on mode configuration, select the desired option from the drop down list.
- Port Type: To filter LAG based on port type, select the desired option from the drop down list.
- Node/IP: To filter LAG by node name, enter the node name in text box. To search based on node IP, select the check box and then enter the IP Address in the text box. On entering a character, the list related to that character is displayed and the user can select from the options.
- Switch: Select the desired switch number. This field is enabled when a node name or IP is entered in the IP field.
- Port: Select the desired port. This field is enabled when a switch number is selected in the Switch field..
After entering the desired filtering criteria, click Filter. The result is displayed on Link Aggregation Group page.
Click Reset(Clear Filtering Criteria) to clear the search criteria.