Edit Capacity Distribution Profile

Perform the following steps to edit the selected Capacity Distribution Profile:

1. Go to Configuration > Layer 2 > Qos menu and click Capacity Distribution Profile option. Capacity Distribution Profile page is displayed.
2. Double-click the desired profile to edit. Profile Attributes page of Edit Capacity Dist. Profile is displayed (parameters are uneditable).
3. Click Next. The Association page of Edit Capacity Dist. Profile is displayed.
4. Click Add to select the end points and UNI ports for CDP association.
5. Do one of the following:
   • Enter a part or complete IP address in the text box provided and click (Search Node/Tunnel by IP Address or UserLabel). The nodes with the matching IP address are listed under the Network element section. Select the desired IP address; Or
   • Select the IP address from the list. A list of ports will be displayed.
6. Select the port(s).

   The user can view the bandwidth utilization of the selected UNI port by clicking View BW button. Bandwidth Utilization window is displayed. This indicates whether the CDP can be applied to that port or not. If the CDP cannot be applied for a particular CoS, that CoS row will be displayed in Red color.

7. Click Ok.
8. Click Finish. The selected profile is edited.

NOTE: You can use the above procedure to add ports to a profile.