MSRP Commands

This section describes the commands you use to configure the Multiple Stream Reservation Protocol (MSRP) and view information about MSRP.

msrp (Global Config)

Use the msrp command in Global Config mode to enable MSRP global admin mode. For MSRP to be operational, MSRP mode must also be enabled on individual interfaces.

• Default: enabled
• Format:msrp
• Mode: Global Config

no msrp (Global Config)

Use the no msrp command in Global Config mode to disable MSRP global admin mode.

• Format: no msrp
• Mode: Global Config

msrp srClassQav

Use the msrp srClassQav command in Global Config mode to configure EAV traffic class mapping.

• Default:
  • Class A: pcp = 3, remap = 1
  • Class B: pcp = 2, remap = 1
• Format: msrp SrclassQav class [A | B] [pcp | remap] <0-7>
• Mode: Global Config

no msrp srClassQav

Use the no msrp srClassQav command in Global Config mode to reset EAV traffic class mapping to the default value.

• Format:no msrp SrclassQav class [A | B] [pcp | remap]
• Mode: Global Config

msrp boundaryPropagate

Use the msrp boundaryPropagate command in Global Config mode to enable MSRP boundary propagation.

• Default: disabled
• Format: msrp boundaryPropagate
• Mode: Global Config

no msrp boundaryPropagate

Use the msrp boundaryPropagate command in Global Config mode to enable MSRP boundary propagation.

• Format: no msrp boundaryPropagate
• Mode: Global Config

msrp talker-pruning

Use the msrp talker-pruning command in Global Config mode to enable MSRP talker-pruning.

• Default: disabled
• Format: msrp talker-pruning
• Mode: Global Config

no msrp talker-pruning

Use the no msrp talker-pruning command in Global Config mode to disable MSRP talker-pruning.

• Format: no msrp talker-pruning
• Mode: Global Config

msrp max-fan-in-ports

Use the msrp max-fan-in-ports command in Global Config mode to configure the MSRP max fan-in ports value.

• Default: 12
• Format: msrp max-fan-in-ports <0-52>
• Mode: Global Config

no msrp max-fan-in-ports

Use the no msrp max-fan-in-ports command in Global Config mode to reset the MSRP max fan-in ports value to the default.

• Format: msrp max-fan-in-ports
• Mode: Global Config

msrp (Interface Config)

Use the msrp command in Interface Config mode to enable MSRP admin mode on the interface. MSRP can be enabled only on the physical interfaces.

• Default: enabled
• Format: msrp
• Mode: Interface Config

no msrp (Interface Config)

Use the no msrp command in Interface Config mode to disable MSRP admin mode on the interface.

• Format:no msrp
• Mode:Interface Config

msrp srClassPVID

Use the msrp srClassPVID command in Interface Config mode to configure MSRP VLAN ID for the SR traffic class on the interface.

• Default: 2
• Format: msrp srClassPVID 1-4093
• Mode:Interface Config

msrp deltaBandwidth

Use the msrp deltaBandwidth command in Interface Config mode to configure MSRP delta bandwidth for the SR traffic classes A and B.

• Default:
  • Class A – 75
  • Class B – 0
• Format: msrp deltaBandwidth class [A|B] <0–75>
• Mode: Interface Config

clear msrp

Use the clear msrp command in Privileged EXEC mode to clear the MSRP statistics of one or all interfaces.

• Format: clear msrp statistics [<unit/slot/port> | all]
• Mode:Privileged EXEC
• unit/slot/port: If used with the unit/slot/port parameter, the command clears MSRP statistics for the given interface.
• all:If the all parameter is specified, the command clears MSRP statistics for all the interfaces.

show msrp

Use the show msrp command in Privileged EXEC mode to display the status of the MSRP mode.

• Format: show msrp [summary | interface [<unit/slot/port> | summary]]
• Mode: Privileged EXEC

The display parameters for above command are:

• summary: If the summary parameter is used, the command shows global MSRP information.
• interface: If the interface is specified, the command shows MSRP information for that interface.
• summary: If the summary option is specified, the command shows a table containing MSRP information for all interfaces.

show msrp interface bandwidth

Use the show msrp interface bandwidth command in Privileged EXEC mode to display the MSRP bandwidth reservation details for all interfaces.

• Format: show msrp interface bandwidth
• Mode: Privileged EXEC

show msrp reservations

Use the show msrp reservations command in Privileged EXEC mode to display MSRP stream reservation details for the given interface.

• Format:show msrp reservations {<unit/slot/port> [detail | summary]}
• Mode: Privileged EXEC

show msrp stream

Use the show msrp stream command in Privileged EXEC mode to display MSRP stream information.

• Format: show msrp stream [detail | summary]
• Mode: Privileged EXEC

show msrp statistics

Use the show msrp statistics command in Privileged EXEC mode to display MSRP statistics.

• Format: show msrp statistics [summary |<unit/slot/port>]
• Mode:Privileged EXEC

The display parameters for above command are:

• summary: If used with the summary parameter, the command shows global MSRP statistics.