This section describes the commands related to ERP as per ITU-T G.8032 v1/v2. ERP operates on two modes, ring mode and ringlet mode for provisioning of ERP related commands.
no erp ring
This command deletes the ring completely
Default: none
Format: no erp ring <rid>
Mode: global config
NOTE: Once a erp ring is deleted all the ring parameters associated with it are removed. erp ring can be deleted only when the ring and associated ringlets are in deactive state.
no erp ringlet
This command deletes the ringlet config all-together
Default: enabled
Format: no erp ringlet <rlid>
Mode: global config
NOTE: This command is to remove the ringlet completely with all parameters. To delete the ringlet, it should be deactivated.
show erp stats
This command shows the erp stats for given ringlet id.
Default:
Format: show erp stats <rlid>
Mode: privilege
The display parameters for above command are:
East Port: NR received - NR massage received on east port
West Port: NR received - NR massage received on west port
East Port: NR RB received - NR RB massage received on east port
West Port: NR RB received - NR RB massage received on west port
East Port: SF received - SF massage received on east port
West Port: SF received - SF massage received on west port
East Port: NR transmitted - NR massage transmitted by east port
West Port: NR transmitted - NR massage transmitted by west port
East Port: NR RB transmitted - NR RB massage transmitted by east port
West Port: NR RB transmitted -NR RB massage transmitted by west port
East Port: SF transmitted - SF massage transmitted by east port
West Port: SF transmitted - SF massage transmitted by west port
