This section describes the commands you use to configure and view information about the MAC databases. The limit is 32k MAC addresses.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Default:300
Format: bridge aging-time <10-1,000,000>
Mode: Global Config
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format: no bridge aging-time
Mode: Global Config
show forwardingdb agetime
This command displays the timeout for address aging.
Default: all
Format: show forwardingdb agetime
Mode: Privileged EXEC
The display parameters for above command are:
Forwarding DB ID: Fdbid (Forwarding database ID) indicates the forwardingdatabase whose aging timeout is to be shown. The all option is used to display the aging timeouts associated with all forwarding databases. This field displays the forwarding database ID in an IVL system.
Agetime: In an IVL system, this parameter displays the address aging timeout for the associated forwarding database.
