Edit EMS

Edit EMS option on NMS is used when IP address of the EMS has been changed and it becomes unavailable on NMS. You can use Edit EMS to update or change the EMS IP at NMS also. NMS starts to communicate with the EMS using new IP updated.

Perform the following steps to edit the IP address of the selected EMS:

1. Go to Topology and click Manage EMS option. Manage EMS page is displayed with a list of EMS(s) and its details.
2. Select the desired Ems Name from the list and click . Edit EMS window is displayed.

   

3. Enter the changed IP address in EMS IP field.
4. If the selected EMS is in Hot StandBy mode in different subnet and the secondary IP address of the EMS has also changed, then select HotStandBy in different subnet check box and enter the changed HAIP 1/2/3 in the text box provided.
5. Click Apply. The EMS is edited with the new IP address.

Edit EMS option on NMS is applicable only when IP address has already been changed for the EMS.

An error is displayed if the user tries to change the EMS IP address at NMS level only and in case of mismatch of the IP address between EMS and NMS.

NOTE 1: After editing/changing the IP address, EMS becomes available in NMS.

NOTE 2: Changing EMS password option is available on the NMS login page by clicking on change password link. For more information, refer Change password for TJ5100 from TJ5500.