Edit TL

TJ5500 supports setting of bandwidth threshold value for individual Ethernet Topological Links and editing the TL label. A Bandwidth Threshold Crossed alarm will be raised when reserved bandwidth over a TL exceeds the set threshold value. This alarm can be viewed on Manage Alarms page.

Perform the following steps to set bandwidth threshold value for a TL:

1. Go to Topology menu and click Manage TL option. Manage Topological Links page is displayed.
2. Under TOPOLOGICAL LINKS tab, select the desired TL and click (Edit TL). Select the desired option from the following:

• To edit the label, select the option Edit TL UserLabel. Go to Topology View tab and click on Modify User Label.

  

• To edit the bandwidth threshold, select the option Edit Bandwidth Threshold and enter a value between 0 and 100 and click (Save TL Configuration). A confirmation message is displayed. Click OK. Successfully message is displayed. Click OK.

NOTE: If no bandwidth threshold value is set on a TL, then global threshold value set on Qos Properties page will be applicable.