Topology View

To launch the Topology View window successfully, make sure the webswing application is running on client system.

The Topology View menu option enables the user to view EMS, their partitions and the nodes. Using this menu, you can do the following steps:

View EMS, partitions and the nodes.
View EMS, partition and node level alarms.
Add/remove a node in the topology.
Assign or view SRLG IDs on TLs.
Create and delete topological links.
Viewing and calculating span loss.
Create and delete VPLS cloud link.
Create and view circuits.
Enable/disable PM on packet trunks.
View performance monitoring details.
View PM reports and live charts for multiple TLs.
View historical alarms.
View bandwidth utilization of individual trunk.
Generate bulk BW report for multiple TLs.
Create third party cloud.
Resync EMS.
Create Tunnels.
Filter rings, tunnels, services, pseudowires for multiple switches.

Launching Topology View

To view the Topology View, go to Topology menu and click Topology View option. Topology-View page is displayed.

Topology View- window

After the Topology View is launched, page is displayed as shown in the following figure:

Topology View

Topology View tab will display all the TJ5100 that is added to the TJ5500.

NOTE: In order to view the pop-up window, the user must either allow the pop-ups for that node or enable the display of pop-up window on the browser.

When the user launches the Topology view for the first time, warning message "Client is updated. Please Reload Topology View" is displayed. Click OK and reload the page.

Understanding Tabs Available in Topology View

The four tabs available in Topology View are Management View, Network View (Nodes), and Network View (Switches). The icons in the Topology View are enabled based on the tab selection.

Topology View Tabs

View	Displays
	Management View This tab represents the Management View. All EMS(s) present in TJ5500 along with number of severity based alarms associated with each EMS is displayed in this view.
	Network View (Nodes) This tab represents the Network View (Nodes). All nodes within the selected partition along with the topological link connectivity is displayed in this view. A TL with link cut or LOS is displayed with X mark.
	Network View (Switches) This tab represents the Network View (Switches). All the switches within the selected partition in NMS along with the connectivity is displayed in this view.

View

Displays

Topology View- Management View

Management View

This tab represents the Management View. All EMS(s) present in TJ5500 along with number of severity based alarms associated with each EMS is displayed in this view.

Topology View- Network View (Nodes)

Network View (Nodes)

This tab represents the Network View (Nodes). All nodes within the selected partition along with the topological link connectivity is displayed in this view. A TL with link cut or LOS is displayed with X mark.

Topology View- Network View (Switches)

Network View (Switches)

This tab represents the Network View (Switches). All the switches within the selected partition in NMS along with the connectivity is displayed in this view.

Home tab ribbon displays the frequent operations done by the user for creating the topology.

Parameter	Description
	Allows you to refresh the Topological View.
	Allows you to view the alarms.
	Allows you to create, delete TLs and toggle TL view.
	Allows you to create and view circuits on SDH nodes and services/tunnels/pseudowires/rings on L2 switches.
	Allows you to create tunnels and services, and view TLs of tunnels.
	Allows you to manage NE and TL properties, L1 Ports, Lambda power, and view Intra NE TLs and equipments.
	Click this option to save the topology.