Create Tunnel from selected Tunnels

Perform the following steps to create a tunnel from selected tunnels:

1. Click Configuration > Layer 2 > Tunnels and click on Complete Tunnels. The Complete Tunnels page is displayed.
2. Click [Select Tunnel(s) For Tunnel Provisioning]. A check box against each tunnel on Complete Tunnels page is displayed under Select Tunnel(s) column.
3. Select the desired tunnels by clicking the check box against those tunnels.

   To undo the check box selection done, the user can click [Clear Selected Tunnel(s)].

4. After selection, right-click and select Create tunnel using selected tunnels from the options displayed. The Create tunnel using selected Tunnel(s) window is displayed.

   

5. Further steps is same as creating a MPLS-TP tunnel in general. Refer to the topic Create Tunnels from Step 1: General Attributes for steps and parameter description. Note that in End Points page of Create tunnel using selected Tunnel(s) window, only those end points which are a part of the selected tunnels are displayed under Network element list.