Add bandwidth

Add or Delete Bandwidth feature is applicable only for P2P circuits having one end VCG interface.

To add or delete the bandwidth of the circuits, do the following steps:

1. Click Configuration > Layer 1 > Circuits menu and click on Manage Circuits. The Manage Circuits page is displayed.
2. Right-click the desired circuit and click Bandwidth and then select from the following:

To add bandwidth,

1. Click Add Bandwidth. The Add Bandwidth window is displayed.

   

2. To view the available time slots or frequency count (percentage based) on the associated links, click Show Available BW button. An Associated Links window is displayed with details.

   

3. Close the Associated Links window.
4. Enter the number of links.
5. Click Create on Add Bandwidth window. A success message is displayed.

To add bandwidth diversely,

1. Click Add Bandwidth Diversly. The Create Circuit From Topology View page is displayed. Step by step circuit details are displayed.

   

2. Enter the number of links required in Common Circuit Info details.

   NOTE: Source Info and Destination Info cannot be edited.

3. The graphical view of the selected circuit is displayed along with the topology view of all circuits in TJ5500.
4. Select the node from topology view and click Expand. The Out Going Links for <Node Name> window is displayed.
5. Double-click the desired trunk.
6. Repeat the steps d and e to complete the path to reach the destination.
7. Click Create Circuit or Create & Activate. A success message is displayed.

To remove bandwidth,

1. Click Remove Bandwidth. A confirmation message is displayed.
2. Click OK. A success message is displayed.