Previous Topic

Next Topic

Book Contents

Book Index

Managing and Configuring DCN

DCN is an ECC (Embedded Communication Channel) on the node. The NES can be provisioned to act as an OSPF router for ECC in remote management. It can exchange and maintain the routing information on both the ECC and LAN to which it is connected using the NMS port.

NOTE: If the ECC_bytes are enabled on the STM-N port, then the corresponding bytes cannot be used for tunneling.

In This Section

Viewing the Network Interfaces

Provisioning Embedded Communication Channels

Provisioning Management Channel

Provisioning New ManagementTrafficSource Entry

Provisioning General Communication Channel (GCC)

Editing Network interface provisioning

Delete Network Interfaces

Configuring External Management Interface

Static Route

Managing Proxy ARP Neighbour

OSPF

Working with Serial Port

See Also

Configuration

Managing MSP Groups

Working with 1:N MSP Groups

Working with MS-SP Ring

Configuring Squelch Table

Managing Cross-connects

Managing Overhead Tunnels

Provisioning Environmental Alarm Input

Configuring SNMP Traps

LAG

Managing Facilities

Managing NE Adjacency

GMPLS

Synchronizing the Node