|
|
|
|
HCPSLine03 card supports 4xSTM-64/OTU2/OTU2e/10GE interfaces and processes the received frame for all alarms and performance monitoring signals.
HCPSLine03 card supports the following functional features:
The mode(s) supported with HCPXCC03:
The mode(s) supported with HCPXCC04:
The mode(s) supported with OSMC01:
The mode(s) supported with OAMC:
NOTE: Ports P5 to P8 are not supported.
Front panel
The following figure shows the front panel view of HCPSLine03 card:
Power specifications
HCPSLine03 - Power specifications
Specification |
Range |
|---|---|
Input Voltage |
-48V DC |
Maximum Power consumption |
110W |
Visual indicator details
The visual indicators on the HCPSLine03 card has two LEDs - the Sts (Status) LED indicate the status of the card and the Act (Active) LED indicates whether the card is active or not.
HCPSLine03 - Active and status LEDs indications
Card State |
Status LED |
Active LED |
|---|---|---|
Card initialization: State before the card initialize is complete on card insertion. |
Amber (Steady) |
Amber (Steady) |
Card in service: Initialization complete and card in service. |
Green (Steady) |
Green (Steady) |
Card mis-match: Node has already configured the slot with some other card. |
Amber |
Amber |
Card failed during boot up. |
Red |
Amber |
Card failed while in-service. |
Red |
Green |
Improper jack in of the card. |
Green (Blinking) |
Green (Blinking) |
Hard Reset: All devices reset, FPGAs cleared and reprogrammed. Goes to initializing state next. |
Amber |
Amber |
Soft Reset: Software is restarted, devices are reinitialized with provisioning. Goes to initializing state next. |
Green |
Green |
HCPSLine03 - XFP Port LEDs indications
State |
Rx LED |
Tx LED |
|---|---|---|
XFP present (LASER on) with Rx LOS. |
Amber |
Green |
XFP present (LASER off) with Rx LOS. |
Amber |
Off |
XFP present (LASER on) with no Rx LOS. |
Green |
Green |
XFP present (LASER off) with no Rx LOS. |
Green |
Off |
Card failed while in-service. |
Red |
Green |
XFP missing (LOS detected), LASER On (attempted). |
Amber |
Green |
XFP missing (LOS masked since XFP missing and set to Admin_down), LASER Off (attempted). |
Amber |
Off |
XFP failed (whether provisioned, unprovisioned, LOS or no LOS). |
Red |
Red |
LASER types
The LASER types supported are as follows: