HCPSLine24

HCPSLine24 is a single slot aggregate card providing interface for 2 pluggable 100GE/OTU4 optical ports.

HCPSLine24 card supports the following functional features:

Supports a maximum of 100G SDH/OTN backhaul.
100G ports support Coherent DWDM CFP and client CFPs in 2 ports.
Processes the received OTU4/100GE frame for all alarm and performance monitoring signal.
Supports live insertion and hot-swap capability.

The mode(s) supported with HCPXCC03, HCPXCC04, OAMC and OSMC01 includes:

1x100G Transponder OTU4 NP: 1XOTU4/100GE (P4) + 1XOTU4 (P1)

Following is a schematic of the traffic configuration with POTP configuration:

HCPSLine 24

This card also can be configured as 100G transponder and regenerator card:

100GE/OTU4 ->100GE/OTU4 (For CFP to CFP)

Following is a schematic of the traffic configuration in DWDM configuration:

Line 24 DWDM

Front panel

Following figure shows the front panel view of HCPSLine24 card.

Front Panel View- HCPSLine24 Card

Power specifications

HCPSLine24 - Power Specifications

Specification	Range
Input Voltage	-48V DC
Maximum Power consumption	135W

Visual indicator details

The visual indicators on the HCPSLine24 card has two LEDs - the Sts (Status) LED indicate the status of the card and the Act (Active) LED indicates whether the card is active or not.

HCPSLine24 - Active and status LEDs indications

Card State	Status LED	Active LED
Card initialization: State before the card initialize is complete on card insertion.	Amber (Steady)	Amber (Steady)
Card in service: Initialization complete and card in service.	Green (Steady)	Green (Steady)
Card mis-match: Node has already configured the slot with some other card.	Amber	Amber
Card failed during boot up.	Red	Amber
Card failed while in-service.	Red	Green
Improper jack-in of the card.	Green (Blinking)	Green (Blinking)
Hard Reset: All devices reset, FPGAs cleared and reprogrammed. Goes to initializing state next.	Amber	Amber
Soft Reset: Software is restarted, devices are reinitialized with provisioning. Goes to initializing state next.	Green	Green

HCPSLine24 - CFP Port LED indications

State	Rx LED	Tx LED
CFP present (LASER on) with Rx LOS	Amber	Green
CFP present (LASER off) with Rx LOS	Amber	Off
CFP present (LASER on) with no Rx LOS	Green	Green
CFP present (LASER off) with no Rx LOS	Green	Off
Card failed while in-service	Red	Green
CFP missing (LOS detected), LASER On (attempted)	Amber	Green
CFP missing (LOS masked since SFP missing and set to Admin_down), LASER Off (attempted)	Amber	Off
CFP failed (whether provisioned, unprovisioned, LOS or no LOS)	Red	Red

LASER types

HCPSLine24 - Supported LASER types

Optics	Rate	Reach*

CFP	100GBASE-SR10/OTU4	100m
CFP	100GBASE-LR4/OTU4	10km
CFP	100GBASE-ER4/OTU4	40km
CFP Coherent	100GE/OTU4	80km ~2500 km (amplified)
* For G.652 fiber under Standard link conditions