CEF-5

This section describes the features and functional description of the Ethernet switching card, CEF-5. CEF-5 card is supported in TJ1600-6 and TJ1600-11 chassis.

CEF-5 card supports 4x10G LAN over XFP, 8x1000BASE-X over SFP, 4x10G LAN over SFP+ and 4x10/100/1000BASE-TX over RJ45. CEF-5 card supports a switching capacity of 80G. CEF-5 card supports uplink SDH backhaul of 20G capacity. CEF-5 card is also supported in L1 mode providing 20G worth of EOS support.

CEF-5 card supports the following interfaces:

4x10G LAN over XFP interfaces on ports P1, P2, P3, and P4 with LC connectors.
4x10G LAN over SFP+ interfaces on ports P13, P14, P15, and P16 with LC connectors.
8x1000BASE-X over SFP interfaces on ports P5 to P12 with LC connectors.
Optionally, ports P5 to P12 also support electrical SFPs as 10/100/1000BASE-TX ports with RJ-45 connectors.
CEF-5 card supports 4x10/100/1000BASE-TX over RJ45 ports namely P17, P18, P19, and P20.

CEF-5 card supports the following functional features:

Jumbo frames up to 9216 bytes.
L2 switching capability.
SyncE
1588v2 Transparent Clock.
Supports 2GB disks.

The CEF-5 card supports the following operational modes:

2x10G over XFP + 8x1000BASE-X over SFP + 4x10/100/1000BASE-TX over RJ45 (Default mode; two XFP and four SFP+ ports are not usable in this mode).
4x10G over XFP + 2x10GE over SFP+ + 8x1000BASE-X over SFP + 4x10/100/1000BASE-TX over RJ45 (Two SFP+ ports are not usable in this mode).
4x10G over XFP + 4x10GE over SFP+ (SFP and RJ45 ports are not usable in this mode).

NOTE: The first operational mode is the default mode available when CEF-5 card is jacked in TJ1600 chassis while second and third are licensed based modes.

Front panel

The following figure shows the front panel view of CEF-5 card.

Front Panel View- CEF-5 Card

Power specifications

CEF-5 - Power specifications

Specification	Range
Input Voltage	-48V DC
Maximum Power consumption	240W Maximum

Visual indicator details

The visual indicators on the CEF-5 card include two LEDs namely ACTIVE and STATUS, provided to indicate the system status and whether the system has become active.

CEF-5 - Active and status LEDs indications

Card State	Status LED	Active LED
Card initialization: State before the card initialize is complete on card insertion.	Amber (Steady)	Amber (Steady)
Card in service: Initialization complete and card in service.	Green (Steady)	Green (Steady)
Card mis-match: Node has already configured the slot with some other card.	Amber	Amber
Card failed during boot up.	Red	Amber
Card failed while in-service.	Red	Green
Hard Reset: All devices reset, FPGAs cleared and reprogrammed. Goes to initializing state next.	Amber	Amber

CEF-5 - SFP/SFP+/XFP Port LED indications

State	LED
Optical module present (LASER on) with Rx LOS.	Amber blink
Optical module (LASER off) with Rx LOS.	Amber
Optical module (LASER on) with no Rx LOS.	Green
Optical module (LASER off) with no Rx LOS.	Green blink
TX Fault with no RX LOS.	Amber/Green blink
TX Fault with RX LOS.	Red
Optical module missing.	Off
Optical module failed (whether provisioned, unprovisioned, LOS or no LOS).	Red