HCPSLine28 is a single slot aggregate card providing four 100GE/OTU4 optical ports. The 100G ports support Coherent DWDM CFP and client CFPs in 2 ports.
HCPSLine28 card supports CFPs on ports P1 and P4 and QSFP28 on ports P2 and P3.
HCPSLine28 card supports the following functional features:
The mode(s) supported with HCPXCC03, HCPXCC04, OSMC01 and OAMC include:
Front panel
Following figure shows the front panel view of HCPSLine28 card.
Power specifications
Specification |
Range |
---|---|
Input Voltage |
-48V DC |
Maximum Power consumption |
133 W |
Visual indicator details
The visual indicators on the HCPSLine28 card has two LEDs - the Sts (Status) LED indicate the status of the card and the Act (Active) LED indicates whether the card is active or not.
Card State |
Status LED |
Active LED |
---|---|---|
Card initialization: State before the card initialize is complete on card insertion. |
Amber (Steady) |
Amber (Steady) |
Card in service: Initialization complete and card in service. |
Green (Steady) |
Green (Steady) |
Card mis-match: Node has already configured the slot with some other card. |
Amber |
Amber |
Card failed during boot up. |
Red |
Amber |
Card failed while in-service. |
Red |
Green |
Improper jack-in of the card. |
Green (Blinking) |
Green (Blinking) |
Hard Reset: All devices reset, FPGAs cleared and reprogrammed. Goes to initializing state next. |
Amber |
Amber |
Soft Reset: Software is restarted, devices are reinitialized with provisioning. Goes to initializing state next. |
Green |
Green |
State |
Rx LED |
Tx LED |
---|---|---|
CFP present (LASER on) with Rx LOS. |
Amber |
Green |
CFP present (LASER off) with Rx LOS. |
Amber |
Off |
CFP present (LASER on) with no Rx LOS. |
Green |
Green |
CFP present (LASER off) with no Rx LOS. |
Green |
Off |
Card failed while in-service. |
Red |
Green |
CFP missing (LOS detected), LASER On (attempted). |
Amber |
Green |
CFP missing (LOS masked since SFP missing and set to Admin_down), LASER Off (attempted). |
Amber |
Off |
CFP failed (whether provisioned, unprovisioned, LOS or no LOS). |
Red |
Red |
State |
Rx LED |
Tx LED |
---|---|---|
QSFP28 present (LASER on) with Rx LOS. |
Amber |
Green |
QSFP28 present (LASER off) with Rx LOS. |
Amber |
Off |
QSFP28 present (LASER on) with no Rx LOS. |
Green |
Green |
QSFP28 present (LASER off) with no Rx LOS. |
Green |
Off |
Card failed while in-service. |
Red |
Green |
QSFP28 missing (LOS detected), LASER On (attempted). |
Amber |
Green |
QSFP28 missing (LOS masked since SFP missing and set to Admin_down), LASER Off (attempted). |
Amber |
Off |
QSFP28 failed (whether provisioned, unprovisioned, LOS or no LOS). |
Red |
Red |
LASER types
Optics |
Rate |
Reach* |
---|---|---|
QSFP28 |
100GBASE-LR4/OTU4 |
10km |
QSFP28 |
100GBASE-ER4-Lite |
25Km NOTE: Reach can be up to 40Km with on-board FEC. |
CFP |
100GBASE-SR10/OTU4 |
100m |
CFP |
100GBASE-LR4/OTU4 |
10km |
CFP |
100GBASE-ER4/OTU4 |
40km |
CFP Coherent |
100GE/OTU4 |
80km ~2500 km (amplified) |
* For G.652 fiber under Standard link conditions |