View optical power reports of selected node(s) or TL(s)

Perform the following steps to view the reports of selected nodes or TLs:

1. Go to Topology menu and click Topology View. The Topology View window is displayed.
2. Under Network View (Nodes) tab select the desired node(s)/TL(s).
3. Go to Reports menu tab and click (Optical Power Report). The View Reports window is displayed with a Report Type drop-down option.

   

4. Click Submit. A successful message is displayed.
5. Click OK. Optical Power Reports page is displayed.

   

   Additional parameter Rx Threshold Power (dBm) is displayed on Optical Power Reports page for selected TLs which allows you to enter the power threshold value of the received signal in terms of dBm. Acceptable range of this parameter is -30 to 10 dBm.

6. Click (Refresh Report) button to reload the content of the report.
7. Click (Export to CSV) button for viewing reports in CSV format.
8. Click (Save TL Configuration) button to save the Rx Threshold Power details, if modified by the user. This button is displayed only in Optical Power Reports page for selected TLs.

NOTE: Maximum of 5 nodes and 50 TLs can be selected for viewing the reports.

DWDM nodes and Unidirectional links and are not supported for viewing optical reports.