Launch node page

Perform the following steps to launch the NE Information page of the selected Node:

1. Go to Topology menu and click Topology View option. Topology View window is launched.
2. Click Network View (Nodes) and select the desired partition.
3. Select the desired node and then perform one of the following task to launch the node page:
   • Click (Launch node page of selected Network Element); or
   • Right-click the selected node, go to Node operations and then click Launch Node Page.

   A new browser window is displayed with result depending on the case mentioned as follows:

   NOTE: CLI page will be launched for TJ1400P-M series nodes.

   > Case 1: If Radius is enabled on the selected node, node WUI will be launched with auto-login using the Username and Password of NMS user who performed the launch node page operation.

   > Case 2: If Radius is disabled on the selected node and GCT disabled from EMS, login page of the node will be launched. User has to enter Username and Password to login to that node.

   > Case 3: If GCT is enabled from EMS but Radius is not supported on the selected node, UserName and Password for node access will be displayed. Press OK and enter the details to login to that node.