View PM details

User can launch and view PM details of EMS GUI from Network View (Nodes) or Network View (Switches) tab on Topology View window.

PM data for 24Hr interval monitoring is managed up to 30 days from the date of generation of the PM data.

Perform the following steps to view the PM details of the selected EMS:

1. Go to Topology menu and click Topology View option. Topology View window is launched.
2. Click Network View (Nodes) / Network View (Switches) tab and select (Shows PM Details). Select EMS Name window is displayed.

   

3. Select the EMS Name from the drop-down options available.
4. Click Submit. Context:PMDetails based window of the EMS is launched.

   

5. Select the Node Name from the drop down list and enter other details as desired.
6. Click Add for enabling performance monitoring. The node gets added under the 'Node Name' column.

   Repeat step 5 and 6 to add more nodes, if required.

7. Click Submit. The 'Node Object Table' will be populated with ports and objects from the selected node(s).
8. To Enable/Disable PM, select the 15Min and/ 24Hr check box against the desired port types.
9. Click Apply Changes. Apply Action Successful! message is displayed.
10. To view the PM Data, perform the following:
    • Right-click the desired object and select the desired option (View History PM/ View Recent 24Hr PM/ View Recent 15Min PM).
    • If 'View History PM' is selected, go to PM Data column, click the calendar icon and select the 'Start Time' and 'End Time' and the radio button against the desired 'Granularity'. Click Submit.
    • To view performance data in chart, click Chart. Create Performance Chart window will be displayed. Select the check box against the desired Performance Counters. Click Show. Performance Data is represented in form of chart which the user can Save or Print.

NOTE: PM data cannot be viewed for more than two objects at a time. PM object where right-click operation was performed will be selected.