Creating service from Topology View is supported under Network View (Switches) tab.
There are two scenarios when creating a service from Topology View namely,
End Points present in same partition
End Points present in different partition
Creating Service with End Points in same Partition
Perform the following steps to create a service between switches present in same partition:
Go to Topology menu and click Topology View option. Topology View window is displayed.
Click Network View (Switches) tab and select the desired partition.
Select the desired switches using CTRL button, go to Provisioning menu tab and click (Create Service). Create Service Using Selected Switches page is displayed in a new tab.
For further steps and parameter description, refer to desired topics under Services section.
NOTE: Only the switches selected in Topology View (step 3) will be displayed in the Network element list during End Points addition.
Creating Service with End Points in different Partitions
Perform the following steps to create a service between switches present in different partitions:
Go to Topology menu and click Topology View option. Topology View window is displayed.
Click Network View (Switches) tab, go to the desired partition and select the desired switch (source). Select another partition from the navigation pane, press CTRL button and select the other desired switch (destination).
Right click on the selected partition and click Create .1q/.1ad/MPLS-TP Service using Selected Partition(s).
Create Service Using Selected Partitions page is displayed in a new tab. Only those two switches will be displayed in the Network element list on End Points page.
For further steps and parameter description, refer to desired topics under Services section.
(Create Service). Create Service Using Selected Switches page is displayed in a new tab.
