|
|
|
|
Perform the following steps to view the complete information of services:
Service Information parameters
Parameter |
Description |
|---|---|
Service Name |
Displays the service name and also allows you to edit/modify the service name. |
Technology |
Displays the technology as DOT1Q_DOT1AD or MPLS-TP on which the service is based. |
CEM Service Type |
Displays the CEM Service type as singleton/non-singleton. |
Domain |
Displays the domain in which the service has been created. When the service is created in All Domain, the domain is displayed as 'Across'. |
Admin State |
Displays the admin status of the service. |
QOS Compliance |
Displays whether the provisioned service is Qos compliant or not. |
Status Message |
Displays the status message of the service. |
Forwarding Type |
Displays the forwarding type selected for the service. This parameter is displayed only for a DOT1Q or DOT1AD service type. |
Owner |
Displays the owner name of the service. |
ERP Protected |
Displays whether the service is an ERP protected service. |
Configuration State |
Displays the configuration state of the service as complete or incomplete. |
Circuit Emulation Service |
Displays whether the service is a CEM service or not by showing true or false against that service. |
DualHomeType |
Displays the dual home type, if provisioned on the service. |
InterSpokeTraffic |
Displays whether the inter-spoke traffic on a Hub and Spoke service has been enabled or not. |
PSC Enabled |
Displays whether Protection State Coordination is enabled on the service or not. |
PW Switching Group |
Displays whether Pseudowire Switching is enabled on the service or not. |
HQOS Service |
Displays whether the service is a HQOS service or not by showing true or false. |
OAM |
Displays the OPM enabled on the service. |
PM State |
Displays whether the PM on the service is enabled or disabled. |
PM Granularity |
Displays the granularity at which the PM has been enabled on the service. |
PM Enabling Time |
Displays the date and the time of PM enabling. |
Y1731 State |
Displays whether the Y1731 on the service is enabled or disabled. |
Y1731 Granularity |
Displays for which granularity the Y1731 is enabled. |
Y1731 Enabling Time |
Displays the date and the time of Y1731 enabling. |
Y1731 CFM Granularity |
Displays the granularity selected for Y1731 Connectivity Fault Management. |
Y1731 CFM State |
Displays whether the Y1731 Connectivity Fault Management is Enabled or Disabled. |
Y1731 CFM Enabling Time |
Displays the date and the time of enabling Y1731 Connectivity Fault Management. |
CFM |
Displays whether the Connectivity Fault Management is Enable or Disable. |
Creation Time |
Displays the creation time of the service from TJ5500. In case of a discovered service, it will reflect the time at which the service was discovered. |
Disjointedness |
Displays whether the SRLG Disjoint is enabled or disabled. |
GPON Service Type |
Displays the GPON service type for the selected service. |
GPON Type |
Displays the GPON type for the selected service. |
All UNIs tab parameters
Parameter |
Description |
|---|---|
IP Address |
Displays the IP address of the node participating in the selected service. |
Node Name |
Displays the name of the node defined by the user. |
Switch Number |
Displays the switch number. The switch number is identification number for switches and is used as the label of node boxes in the tunnel view. |
Port |
Displays the type of Ethernet port. |
Port Type |
Displays the type of the port. |
Outer VLAN |
Displays the Outer VLAN value of the port. |
Inner VLAN |
Displays the Inner VLAN value of the port. |
Ingress VLAN Operation |
Displays the inner VLAN operation. |
Ingress VLAN 1 |
Displays the VLAN ID value, i.e VLAN 1. |
Ingress VLAN 2 |
Displays the VLAN ID value, i.e VLAN 2. |
Frame Classification |
Displays the CVLAN/SPVLAN range. |
Frame Priority |
Displays the priority of the frames. The dot1p priority of frame is 0-7. |
Admin State |
Displays the admin state of the service. |
Node Admin State |
Displays the admin state of the node in which the service is present. |
Status |
Displays the status message of the service created. |
DSCP Value |
Displays the DSCP value of the packets matching. |
DSCP Mask |
Displays the mask assigned for Differentiated Services Code Point (DSCP) field. |
GPON Service Profile |
Displays the profile selected for the GPON service. |
TC Profile Name |
Displays the name of traffic conditioning profile associated with UNI of the selected service, if any. |
TC Policy |
Displays the traffic conditioning policy applied to the service. |
Ingress CIR(in Mbps) |
Displays the ingress CIR value set for the UNI in the selected service. |
Ingress PIR(in Mbps) |
Displays the ingress PIR value set for the UNI in the selected service. |
Ingress CBS |
Displays the ingress CBS value set for the UNI in the selected service. |
Ingress PBS |
Displays the ingress PBS value set for the UNI in the selected service. |
Color Mode |
Displays the ingress color mode. |
Class of Service |
Displays the class of service (CoS) value associated with UNI in the selected service. |
Enable Link Integrity |
Displays whether the link integrity status as enable or disable. |
Priority Mapping Profile |
Displays the priority mapping profile associated with UNI in the selected service, if any. |
DSCP Mapping Profile |
Displays the DSCP mapping profile associated with UNI in the selected service, if any. |
IGMP Profile |
Displays the IGMP profile associated with UNI in the selected service, if any. |
NMS Created Time |
Displays the creation date and time of a service from TJ5500. |
NMS modified Time |
Displays the modified date and time of a service from TJ5500. |
Node Created Time |
In case of discovered services, it will display the date and time at which the service was created on node. |
Node modified Time |
In case of discovered services, it will display the date and time at which the service was modified on node. |
NOTE: When UNI type is PDH, the service information displays All Circuits tab instead of All UNIs. |
|
Service Path |
|
Displays a graphical representation of the service. Basic information of a node participating in service formation is displayed as a screen tip when the cursor is pointed to it. |
|
PseudoWire(s) tab parameters
Parameter |
Description |
|
|---|---|---|
Identifier |
Displays the identification number for pseudowire. |
|
Source Node |
Displays the name of the source node. |
|
Destination Node |
Displays the name of the destination node. |
|
Source IP |
Displays the IP address of the source node. |
|
Destination IP |
Displays the IP address of the destination node. |
|
A-SN |
Displays the service node towards the east side. |
|
Z-SN |
Displays the service node towards the west side. |
|
A-Interface |
Displays the interface of remote node connected to the intermediate node towards east side. |
|
Z-Interface |
Displays the port of remote node connected to the intermediate node towards west side. |
|
Work Path |
Displays the work path. Also allows you to click and view available tunnels on the selected pseudowire. |
|
Protect Path |
Displays the protect path. Also allows you to click and view available tunnels on the selected pseudowire. |
|
Protection Mode |
Displays whether the pseudowire is in 1:1 protected or unprotected mode. |
|
Reversion Mode |
Displays whether the services is in reversion mode or not. |
|
WTR |
Displays the wait-to-restore time. |
|
Protection Status |
If the pseudowire is protected, allows you to click the link to view the protection status of the pseudowire. Pseudowire Protection Status window is displayed with details on Source Node, Destination Node, Protection Status, and Status. |
|
Admin State |
Displays the state of the pseudowire as active/pending/orphan/conflict. |
|
Configuration State |
Displays the configuration state. |
|
Status Message |
Displays the status message of the pseudowire. |
|
External Command |
Displays the triggered external command active on the pseudowire. Mismatch is displayed if there is mismatch of commands at the two endpoints. |
|
Counting Enabled on Work PW |
Displays whether counting is enabled or disabled on work pseudowire as true or false. |
|
Counting Enabled on Protect PW |
Displays whether counting is enabled or disabled on protect pseudowire as true or false. |
|
Service Path |
||
Displays a graphical representation of the service. Basic information of a node participating in service formation is displayed as a screentip when the cursor is pointed to it. |
||
PseudoWire Path |
||
Displays a graphical representation of the pseudowire path for the selected pseudowire with work path in solid line and protect path (if present) as dashed line. |
||
Show tunnel path |
Check box when selected displays a graphical representation of the Underlying Tunnel Path for the selected pseudowire. The following options are also displayed. |
|
|
Click Highlight Work Path button to highlight the work pseudowire and work tunnel path in the graphical view. |
|
|
Click Highlight Protect Path button to highlight the protect pseudowire and protect tunnel path in the graphical view. This option is available in case of protected pseudowire. |
|
|
Click Float/Dock TunnelPath SVG button to dock or undock the Underlying Tunnel Path tab. Float TunnelPath SVG button when clicked opens the Underlying Tunnel Path tab as a separate window where user can maximize, minimize or dock again the previous view. |
|
Work Path Switches |
||
Displays the details like EMS Name, Node Name, IP Address, Switch Number, AEndInterface, ZEndInterface, Admin State, and Status of switches that are part of 'work path' of the selected pseudowire. |
||
Protect Path Switches |
||
Displays the details like EMS Name, Node Name, IP Address, Switch Number, AEndInterface, ZEndInterface, Admin State, and Status of switches that are part of 'protect path' of the selected pseudowire. |
||
PseudoWire MA Config |
||
Path |
Displays the pseudowire path as work or protect path. |
|
Admin State |
Displays the admin status of the pseudowire. |
|
Status |
Displays the status of the pseudowire path. |
|
MD Name |
Displays the maintenance domain name. |
|
MD Level |
Displays the maintenance domain level. |
|
MA Name |
Displays the maintenance association name. |
|
Source MEPID |
Displays the source ID for the Maintenance End Points. |
|
Destination MEPID |
Displays the destination ID for the Maintenance End Points. |
|
Y1731 Mode |
Displays whether Y1731 is set as enabled or disabled on the pseudowire. |
|
DM Frame Priority |
Displays the priority assigned to the delay measurement (DM) frame. |
|
No. of DM Frames |
Displays the number of frames sent. |
|
DM Interpacket Gap(ms) |
Displays the recovery interval between frames set that allows devices to prepare for reception of the next frame. |
|
Pw Status Refresh Time |
Displays the time interval between pseudowire status message. |
|
Source Attachment ckt |
Displays the port at the source node added as a local attachment. |
|
Destination Attachment ckt |
Displays the port at the destination node added as a local attachment. |
|
EVC(s) tab parameters
Parameter |
Description |
|---|---|
EMS Name |
Displays the EMS Name in which the corresponding node is present. |
Node Name |
Displays the name of the node. |
IP Address |
Displays the IP Address of the node. |
Switch Number |
Displays the Service Switch number of the node. |
Name |
Displays the service name on the corresponding node. |
State |
Displays the admin state of the service. |
EVC Type |
Displays the type of the EVC as P2P (Point To Point) or M2M (MultiPoint To MultiPoint). |
Status Message |
Displays the service status message. |
IGMP Profile |
Displays the IGMP profile associated with UNI in the selected service, if any. |
End Points |
|
PTP Name |
Displays the port name of the interface participating in EVC on that node. |
EndPoint Type |
Displays whether the port type of the end point as .1ad or .1q or MPLS. |
EndPoint Interface Type |
Displays whether the end point interface is client facing (UNI) or or network facing (NNI). |
Outer VLAN |
Displays the Outer VLAN value of the port. |
Inner VLAN |
Displays the Inner VLAN value of the port. |
Ingress VLAN Operation |
Displays the inner VLAN operation. |
Ingress VLAN 1 |
Displays the VLAN ID value, i.e VLAN 1. |
Ingress VLAN 2 |
Displays the VLAN ID value, i.e VLAN 2. |
State |
Displays the status of the port. |
Priority |
Displays the assigned priority. |
DSCP Value |
Displays the DSCP value. |
DSCP Mask |
Displays the DSCP mask value. |
Trust Ingress Priority |
Displays whether the trust ingress priority is set as true or false. |
Default COS |
Displays the COS value assigned to the UNI port. |
StormControl in Mbps |
Displays the value in Mbps if storm control is enabled. |
MEP Configuration |
Allows you to click the link View MEP for viewing the MEP details of the CFM Enabled services. |
LLF Configuration |
Displays the configured LLF, if applicable. |
FDFRs tab parameters
Parameter |
Description |
|---|---|
EMS Name |
Displays the name of the EMS in which it is present. |
Node Name |
Displays the name of the node. |
IP Address |
Displays the IP address of the node. |
Switch Number |
Displays the switch number of the node. |
Name |
Displays the name of the service. |
State |
Displays whether the service is active, pending, partial, conflict or orphan. |
Self State |
Displays the state of EVC. |
FDFR Type |
Displays the FDFR Type. |
Status Message |
Displays the status message. |
CESIWF(s) tab parameters
Parameter |
Description |
|---|---|
Source Node |
Displays the source node. |
Source Work TDM Channel |
Displays the source work TDM channel which is emulated over Packet Network. |
Source Work State |
Displays the status of the source work port. |
Source Protect TDM Channel |
Displays the source protect TDM channel which is emulated over Packet Network. |
Source Protect State |
Displays the status of the source protect port. |
Source Protect CEM Port |
Displays the protected CEM (circuit emulation) port on source side. |
Destination Node |
Displays the destination node. |
Destination Work TDM Channel |
Displays the destination work TDM channel which is emulated over Packet Network. |
Destination Work State |
Displays the status of the destination work port. |
Destination Protect TDM Channel |
Displays the destination protect TDM channel which is emulated over Packet Network. |
Destination Protect State |
Displays the status of the destination protect port. |
Destination Protect CEM Port |
Displays the protected CEM (circuit emulation) port on destination side. |
Source ECID |
Displays the source Emulated Circuit Identifier in the transmit and receive side. |
Destination ECID |
Displays the destination Emulated Circuit Identifier in the transmit and receive side. |
Clock Recovery Mode |
Displays the mode used to recover timing from packet side for transmitting towards TDM side. |
RTP Header |
Displays the selection made for the RTP header in the CEM packets. |
Payload Packet Size |
Displays the size of the payload packet. |
Jitter Buffer Depth (µsec.) |
Displays the depth of Jitter Buffer which is used to smooth out bursty packets while sending towards TDM side. |
Source Threshold Values |
Displays the values for source threshold. |
Destination Threshold Values |
Displays the values for destination threshold. |
