Deactivate service

Perform the following steps to deactivate or delete the selected service(s):

1. Go to Configuration > Layer 2 > Services menu and click Complete Services/Incomplete Services option. The Complete Services/Incomplete Services(s) page is displayed respectively.
2. Select the service(s) desired to be deactivated or deleted.
3. Click (Deactivate/Delete Service) and select the Deactivate Service option. A confirmation window is displayed.
4. Click OK. Authorize Deactivating Service window is displayed.

   The user is required to authenticate the deactivation of service(s).

5. Enter the password for the user. The password in this case will be the TJ5500 user login password.
6. Click OK. Deactivation command sent successfully message is displayed.
7. Click OK. The status of the service is updated.

NOTE: The procedure for deactivating the services holds good for both the ELAN and ELINE services.

A service having L1 card can be minimum "partial" state on performing the deactivation of the service. The TJ5500 discovers L1 cards with Ethernet ports as switches. It discovers the Ethernet-to-VCG mapping as a fixed EVC in the L1 switch.